AECP: Level 1 Challenge Project

Hi there!

As most of you know, I’ve been participating in the Altenew Educator Certification Program (AECP). A few weeks ago, I finished all the Level 1 courses for the program and was given a final challenge that I need to complete before I can move on to Level 2. So, today’s post is all about my final challenge project – and it’s a long one! You might want to grab a cup of coffee (or a martini) because I have a lot to share with you!

Here is a summary of the Challenge:

  • Select any 3 components from the classes in Level 1
  • Create his and her card sets (2 sets, 4-6 cards per set)
  • Each card should have a similar and cohesive theme
  • Create packaging for each set
  • Use one recycle element on a set or on its packaging

I selected the following 3 components from the Level 1 classes:

1. Clean and Simple Boutique Cards – As you’ll see, all my cards have a “less is more” feel with just a few interesting components that elevate them without overdoing it. And, of course, the packaging I created for each of my card sets was a concept I learned in this class.

2. Irresistible Inking Techniques – I absolutely love my inks and for this project I chose to do both the direct-to-paper technique and the technique where I painted with my inks.

3. Easy Die Cutting Techniques – Each of my cards uses a stamp with a matching die, but I’ve also incorporated a die inlay into one of my cards since that was a new technique to me in Level 1 and I really wanted to try it again.

You all know how much I love adding sparkle to my cards, so I decided to also incorporate elements from:

4. Let It Shine – I’ve used some form of “shine” on each of my cards – either heat embossing or embellishments.

A Cohesive Theme with Similar Focal Pieces

I wanted a cohesive theme across both sets of cards. To achieve this, I created masculine and feminine versions of the same card using similar layouts and color tones.

Masculine Set:                                                                          Feminine Set:

         

I also (mostly) used the same technique for my focal image in each set:

  • Masculine Set: For the leaf cluster I stamped the image in Frayed Leaf ink, then “thumped” the image with both Forest Glade and Evergreen inks before stamping it to get some variation in color and add depth to the image. On a few of the cards, I used the coordinating die to cut out the leaf image.  
  • Feminine Set: For the flowers, I stamped the image with VersaMark ink and heat embossed it in White. I then used my inks as paint to paint the image. As with the masculine focal image, I used the coordinating die to cut out the image for some of the cards.
Creating the Focal Images:

          

All supplies used to complete this Level 1 Challenge are listed at the bottom of this post.

Now let’s dive in!

Card 1: With Deepest Sympathy

Since this is a sympathy card, I really wanted it to have a simple elegance. The layered plaid cover die, when cut apart, takes on the look of lattice but because it is white-on-white it allows the focal image to stand out. The gold washi and gold embossing give just a bit of sophistication.

Card 1 – Masculine Version:                                                   Card 1 – Feminine Version:

       

Card 1 Process & Tip Photos: 

       

 

Card 1 Instructions:
1. Die cut 3 card fronts using the stitched shape die.
2. Use one of the stitched shape card fronts to die cut the layered plaid cover die (Yep! You’re 
die cutting a die cut). 
3. Cut apart the stitched plaid die so you can use it on both the feminine and masculine cards
and adhere one piece to each of the remaining stitched card fronts [see photo above].
4. Pop up the focal image over the plaid using foam adhesive – be sure to leave room at the 
bottom for a sentiment.
5. Heat emboss the sentiment in gold. Tip: Use a square punch to get a perfect banner end to 
the sentiment strips [see photo above].
6. Adhere a strip of gold washi across the bottom the card front and pop up the sentiment 
over the top with foam adhesive.
7. Use foam tape to adhere the completed card fronts to the card bases. Tip: Use the corner 
of your Score Buddy or stamp positioner when placing the card front on the card base to 
ensure the edges line up perfectly [see photo above].

Card 2: Thank You

These cards were so easy to make. Painting over heat embossed images gives you so much freedom – you can stay in the “lines” or go outside – whatever you feel like doing in the moment. Masking off the rectangles created a wonderful frame for the focal images but I just love how the sentiments go beyond the masked area – it adds just a bit of the unexpected!

Card 2 – Masculine Version:                                                   Card 2 – Feminine Version:

       

Card 2 Process & Tip Photos: 

                            

Card 2 Instructions:
1. Mask off a rectangle on a 4.25x5.5 inch area on watercolor cardstock [see photo above]. 
2. Create your focal image in the center of the unmasked area [see photo above]: 
    a. For the Masculine card, stamp the leaves using the thumping technique, then stamp again 
        with VersaMark ink and heat emboss with clear embossing powder. Tip: Stamping with 
        VersaMark over dye ink “seals” the dye ink onto the card and protects it from smearing. It also
        gives the image a gorgeous shine and makes the colors a bit more vibrant. 
    b. For the Feminine card, stamp the flowers with VersaMark ink, then heat emboss with white 
         embossing powder. 
3. Use your inks to “paint” each of the images and backgrounds. Tip: Smoosh your ink pad down 
on a glass craft surface to create a paint palette. Then spray the edge of each color with just a bit 
of water so that you can gradually pull in color as needed. 
4. Wait for the paint to dry completely before removing the mask. 
5. Stamp the sentiment using VersaMark ink and gold emboss it on the card front. 
6. Use foam tape to pop up the card front on the card base.

Card 3: Hi

Valley cards are one of my favorite layouts – and this is probably my favorite card in the whole set. The “valley” adds interest and dimension and helps to make sure the focal piece stands out from the rest of the card. I just love how the negative space of the die cut “hi” continues the “valley” concept in word form.

Card 3 – Masculine Version:                                                   Card 3 – Feminine Version:

       

Card 3 Process & Tip Photos: 

                              

Card 3 Instructions:
1. Adhere your “valley” patterned paper to your card base. Tip: If you are using a patterned paper with 
words, like I did on these cards, you’ll want to use a T-ruler to make sure that the paper is straight [see photo 
above].
2. Cut a card fronts at 4.25 by 5.5 inches, then cut a 1.5 - 2 inch section out of the card front to create 
the “valley”. The section you cut out should be in the top section of your card. You can pick any size for 
your valley – just make sure your pattern paper fully covers the “valley” and that your focal point can 
span across it.
3. In the bottom right section of the card front, die cut the word “hi”. Tip: Use your T-ruler to make sure
the letters of your word is straight [see photo above].
4. Put foam tape on the back of the two sections of the card front, being sure not to put tape over the 
cutout words, then align the card front pieces on the card base.
5. Adhere your focal piece on the top of the card, being sure that the focal piece spans across the 
valley.
6. Add a few gems to give it a bit of shine.

Card 4: Inspirational (with a Recycled Element)

My husband loves to play the sudoku puzzles in the newspaper every Sunday which leaves us with a pile of newspaper for the recycle bin. I poured through the left-over newspaper looking for something remotely positive to use as a background on this card and other than the comics, the only thing I could find was the weather forecast – so I decided to use that!

Card 4 – Masculine Version:                                                   Card 4 – Feminine Version:

       

Card 4 Process & Tip Photos: 

                             

Card 4 Instructions:
1. Tear off a section of the newspaper large enough to fit across your horizontal card base.
2. Optional: Use white pigment ink and swipe the ink pad across the newspaper clipping to soften the look 
of the print. Be careful not to tear the newspaper. Also: Be aware that if you do this step some of the 
newsprint will transfer to the ink pad and you’ll need to clean it off and re-ink your pad. I chose to do this 
step because I wanted a softer look for these cards and found the color of the newsprint too dark for what 
I wanted [see photo above].
3. Adhere the newspaper to the card base using a glue pen to ensure the glue does not show through the 
newspaper.
4. Stamp the sentiment using VersaMark in the lower right corner of your card front and heat emboss it 
with silver embossing powder. I chose the sentiment for this card because it referred to “wind” and I 
thought it tied in nicely with the weather section of the newspaper I used as the background, but you could 
pick anything and it would still look great.
5. Adhere your focal point image to your card using foam adhesive.
6. Add a few gems to the card front to give it some sparkle.

Card 5: Birthday Wishes

Everyone can use a birthday card, right?! For this card, I continued using my ink as paint but added in a few stencils and some vellum for a soft background.

Card 5 – Masculine Version:                                                   Card 5 – Feminine Version:

       

Card 5 Process & Tip Photos: 

                             

Card 5 Instructions:
1. Heat emboss your sentiment with white embossing powder on a strip of watercolor paper.
2. Spray your stencil with Pixie Spray and position it over a 4 x 5.25 inch card front made of watercolor paper.
3. Use your inks as paint to watercolor over the stencils and over the sentiment strips. You’ll want to dab up 
extra water with a paper towel as you go. Let all pieces dry completely, then remove the stencil. Note: your 
paint will not have “stayed in the lines” of the stencil and that is perfectly fine!
4. Cut a piece of vellum at 4 x 5.25 inches and line up it up over the top of the stenciled panel. Use a few small 
drops of liquid glue to adhere the vellum to the stenciled panel – making sure to place the glue where it won’t 
be seen behind the focal image.
5. Loop twine around the bottom of the panel and tape it to the back side to hold it in place.
6. Add foam tape to the back of the panel and adhere it to the card base.
7. Adhere your focal image to the front of the card.
8. Use foam tape to pop up your sentiment strip on the card front.
9. Add a few gems to the front of the card for a bit of added sparkle.

Note: For my focal point on the masculine card, I decided to stamp two of the leaves from the set – one in Frayed Leaf ink and one in Forest Glades – keeping with the same colors and style of the rest of my focal pieces but adding a bit of contrast.

Card 6: Hello

I fell in love with the inlay die technique from the Easy Die Cutting Techniques class so I wanted to make sure to use it for one of the cards for this Challenge. These cards were so easy to make but the inlay technique really amps up the sophistication!

Card 6 – Masculine Version:                                                   Card 6 – Feminine Version:

       

Card 6 Process & Tip Photo: 

Card 6 Instructions:
1. Create your focal image on a piece of 4.25 x 5.5 inch cardstock (remember to use watercolor paper for the 
feminine card).
2. Cut the “Hello” die out of the card front, overlapping your focal image. Be sure to keep the cut-out “Hello” [see 
photo above].
3. Cut the “Hello” die out of white cardstock 2 more times .
4. Stack the 2 white “Hello” dies together and then adhere the “Hello” you cut out of the card front to the top of 
the stack.
5. Adhere your card front to the card base.
6. Fit your stacked “Hello” die cuts into the card front (it should fit in like a puzzle piece).
7. Add a few gems for some shine!

Packaging

No card set would be complete without perfectly coordinated packaging! I searched Pinterest to find just the right template for my packaging; however, because most of my cards had some sort of added dimension, I wasn’t able to fit all 6 cards in the templates I found – so I ended up creating my own template using 12×12 pattern paper so that it would work for my sets.

Packaging – Masculine Version:                                                   Packaging – Feminine Version:

     

Packaging – Inside View

                          

Packaging Instructions:
1. Create your template "box" using whatever measurements are needed to hold your card sets.
2. Optional: Reinforce your pattern paper with wide washi tape and extra card stock "panels".  I needed to do this 
because my patterned paper was not card stock weight and with 6 cards in each, along with envelopes, I was 
worried that the folds would tear and the bottom would give out.  

Notice that I put the pattern on the inside of the package for a sweet little surprise when opened [see photos above].
 
3. For the outside front of the package, use a 3D embossing folder.
4. Add your ribbon around the package, being sure to have enough ribbon to tie the package closed.
5. Add your focal image.

Supplies Used

Whew! If you’re still reading, I want to thank you so much for sticking with me. This Challenge Project was so much fun and was a great way of showing off some of the new tips and techniques I learned in the Level 1 classes. I just love how everything turned out!  Which one is your favorite?

All the best,

22 Replies to “AECP: Level 1 Challenge Project”

  1. Your sets are beautiful! You have really hit the mark.
    Your descriptions, instructions and supply lists were concise, easy to understand and thorough.
    Fabulous work!

    1. Awe! Thank you so much! It’s hard to know what to include and what not to – especially with so much information to share, so it’s nice to know I hit the mark! I really appreciate your feedback!

  2. Beautiful set of cards, can tell how much time and thought you put into them! Really love the water colored ones ☺️. Good luck on level 2!

  3. Love these cards! You can tell you spent a lot of time on these but future variations will be done more quickly. You should take a lot of pride in these cards. Two expressions I’m not familiar with: Valley paper and Thumping technique. If you have time, could you give me a brief description? Thank you so much and good luck with the rest of your course!

    1. Hi Nance,
      Thank you so much for your kind words! I’m so glad you liked the cards.

      “Valley” is a layout, not so much a paper; however, when you put the top and bottom pieces on your card for the layout, there needs to be something in the “valley”. I call that the “valley paper”. In my card, it is the grayish paper with the script/writing on it.

      Thumping is when you ink your entire stamp in a light color, but before you stamp it you tap or “thump” a darker color ink pad here-and-there (not over the entire thing), and then stamp it. It’s a method for getting multiple colors in one press of the stamp to the paper.

      I hope that helps!
      Jean

  4. This one belongs in our “hall of fame” category. SO good. I knew you will knock it out of the park. I really do not have the words to describe how beautiful your sets are.
    Thank you for blessing my eyes and submitting your gorgeous work to the AECP assignment gallery.

    1. Thank you so much, Erum! I truly enjoyed creating these and I’m so glad you like them! You are so kind!

  5. Hi Jean! Everything about these cards are simply stunning! I love all the muted colors and even if they’re CAS cards, they were beautifully executed and well thought out. Congratulations!!! I’m a fan❤️

  6. Wow! So detailed and beautifully done. Very impressive! I foresee commercial success in your future!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.